Setra Systems 12000C Spécifications télécharger pdf (Page 11)

6. Press the gross key.

7. Wait for the “ok” symbol, then read the gross weight from the display.

Note: Pressing the gross key adds the tare (container) weight to the net (contents)

weight to provide the gross (combined) weight.

Pressing the gross key again (or pressing clear ) will return the display to the net weight.

NET TOTALIZING BY WEIGHT

In some applications, when totalizing the net weight, it is necessary to check the

gross weight periodically to ensure the capacity of the scale is not exceeded. The

procedure used to store both the gross and net weight is called "net totalizing." To

net totalize weight, use the following procedure:

1. Press the — key.

2. Press the clear key.

3. Press the zero key.

4. Place a container on the pan.

5. Press the tare key.

6. Add material to the container.

7. Press the accum key. The display shows the net weight stored in the accumula-

tor.

8. Press the gross key. The display shows the gross weight.

9. Press the tare key. The gross weight is entered into the tare register. In this

manner, the tare register is used to accumulate gross weight.

10. Repeat Steps 6-9 until the desired weight is reached.

11. Press the ./rcl key.

12. Press the accum key. The display shows the net totalized weight.

Note: Setra scales have an active-gross weighing mode. While in this mode, if the tare

key is pressed, the gross weight is entered into the tare register. Likewise, if

the zero key is pressed, the gross weight will be set to zero. This is useful in

certain applications as shown above.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 46 47

Pas de commentaire

Setra Systems 12000C Spécifications Page 11